WorkerSafety
s
c
Your cart is currently empty!
sentry protection products
-
Sentry Protection Products
Collision Sentry® Warning System
$ 16.50
Visit product page →In industrial settings where forklift traffic and pedestrians intersect, Collision Sentry® forklift collision detection and avoidance products can help reduce or eliminate “blind corner” collisions by providing a visual warning that alerts forklift drivers and pedestrians to approaching traffic. Working like a traffic light to flash a warning, the patent-pending Collision Sentry is easy to install, self-powered, highly visible and reliable.
Advantages of the Collision Sentry® Warning System- Self-powered - Uses standard D - cell alkaline batteries, eliminating the need for any wiring to a facility's electrical system
- Passive Infrared Motion Sensors - Programmed to detect motion on both sides of the corner.Sends ample warning to the forklift driver and the pedestrian to correct their movements.
- Highly visible LED lights - Flash a warning when motion is detected from both directions.
- Portable - Requires minimal space and no tools for installation. Installs easily and virtually anywhere.
-
Sentry Protection Products
Concrete Wrap
$ 225.00
Visit product page →Concrete Wrap™ adds a durable layer of protection around your existing round concrete columns, guarding both your column and vehicles from collision damage. Concrete Wrap™ increases the visibility of the column to help guard against collisions altogether. The concrete column wrap protection product is formed from a 2" (50mm) layer of polyurethane foam with a protective EVA shell.
- 2" (50mm) thick foam body with durable EVA skin
- ribbed inner surface to form-fit for a variety of round concrete columns
- belt recesses to allow for easy installation with no tools
- easily modified to fit most round columns.
- add pieces for larger columns; cut pieces for smaller ones
Download a Concrete Wrap Brochure
Installation
Bare Post before Column Sentry Concrete Wrap protection product is installed. You can see how vulnerable it is to forklift collision damage.
Position wrap protection panels around the concrete post.
Tighten straps to secure the concrete wrap around the column. Now the column is protected to reduce or eliminate collision damage. It is that simple!
-
Sentry Protection Products
Park Sentry Square
$ 109.00
Visit product page →Park Sentry® Square is designed to fit around any sized 4-sided column, square or rectangular. Park Sentry Square is a modular column padding product, made of a combination of corner pieces and flat panels that fit together for a seamless installation. The components fit together with (included) interlocking keys and can be cut to fit smaller columns, or extra panels can be added to fit larger columns. Integrated cutting grooves are spaced every 40mm (1.6") for easy sizing.
Park Sentry Square panels are thin, only 40mm (1.6") thick, adding little to the column's footprint. The corner pieces add thickness where it is needed to absorb heavier blows - the corners are 55mm (2.2"). The The park column padding product is designed to double a typical auto bumper's ability to protect from collisions.
Park Sentry Square is available in standard high visibility yellow or economical black or the components can be combined to create a high contrast installation. The park column padding product is secured to the column using adjustable reflective straps. For extra security Sentry's locking buckles can be added.
Park Sentry Square
Installation
Custom fitting Park Sentry is very easy.
Simply measure the column and size the planks to fit the column.The vertical ribs act as cutting guides and help to visually blend any transition between pieces.
For columns greater than 24" (61cm), extra planks can be used to add length. Each plank adds 17.25"(44cm) in length, or can be custom-cut to match your dimensions.
Install Park Sentry around column
Using the included key-locks, corners and planks are connected and placed around the column
Corners and planks fit together seamlessly
Recessed grommet holes within the belt recesses on each piece allow for optional mechanical installation - hidden by the reflective straps.
Strap down for a finished appearance
The reflective straps tighten easily and create a seamless appearance around the column.
The straps provide a contrasting color to make the column more visible
Any excess strap length can be cut and/or tucked back behind the strap for a neat appearance.
-
Sentry Protection Products
Park Sentry Straps
$ 17.24
Strap-Locking BuckleVisit product page →The Strap-Locking Buckle option for the Park Sentry parking protector gives the added security of a strap that can't come off. This buckle looks and functions just like a typical cinch-buckle, adjusting the length of the strap to fit the exact size of your parking protector installation. The Strap-Locking Buckle then snaps shut, making it difficult, if not impossible, to remove the strap without cutting through. This "vandal-resistant" technology is now available on black reflective Park Sentry straps.
-
Sentry Protection Products
Park Sentry Wall System
$ 49.50
Visit product page →The Park Sentry Wall System is a way to utilize the impact-absorbing properties of our Park Sentry Round panels against a variety of flat walls. Park Sentry absorbs the impact of collisions without scratching painted finishes. The wall system is attached above and below the "bumper zone," meaning no fasteners to scrape the vehicle. Park Sentry is made of lightweight, energy-absorbing ARPRO®, the same material used in automobile bumpers. Park Sentry Wall system is an easy-to-install barrier meant to reduce the cost of vehicle collisions while providing a highly visible, attractive appearance.
Park Sentry Wall System is created by using Park Sentry Round panels. These panels are 1 meter (39.3") tall, and are 702mm (27.65") wide per panel. Each wall clip is 1410mm (55.5") so it spans 2 panels. This means each carton of wall channel will install 12 panels (4 cartons) of Park Sentry Round panels and will cover 8.4 meters (about 27'6") of wall.
Installation
The Park Sentry Wall Clips are lightweight extruded polypropylene channels that are attached to the wall using standard fasteners (not included). The top rail of the channel includes a small groove intended to guide the fasteners and provide proper spacing.
Park Sentry Wall System uses this simple clip system to hold the Park Sentry Round panels firmly to a wall. The clips are continual and span the width of 2 panels. They are available in black only and ship 12 to a carton. The wall clips can be used to "box" the end of a run of panels, as in the photo here.
The Park Sentry Round panels connect to each other using an integrated tab and slot system, seen in this photo of the back (B) side. The Wall clips are attached top and bottom to hold firmly against a wall. These panels are available in yellow or black.
-
Sentry Protection Products
Rack Sentry for End of Racks
$ 39.30
Visit product page →Use Rack Sentry® rack protectors on your pallet rack uprights to protect them from from collisions with your forklifts.
Each Rack Sentry is made of a flexible EVA material that gives your racks a high visibility. Our rack guards are easy to install...you don't even need tools!
Rack Sentry is available in a number of sizes to fit most uprights (All Rack Sentry products are 18" tall and 3" deep.):
- 3" (75mm)
- 3.25" (80mm)
- 3.5" (90mm)
- 4" (100mm)
- 4.75" (120mm)
Rack Sentry® is ideal for intermediate rack uprights where high visibility and a flexible layer of protection is most needed. The product is designed to absorb impact by flexing and then returning to shape to work again. We have tested Rack Sentry® to a limit of 3mph (5km/h) using a 5,000 lb. (capacity) forklift without visible damage to the rack upright, forklift, or product.
Rack Sentry® installs directly to the rack upright, eliminating the need to drill into the floor at the rack upright. In use, Rack Sentry® puts no stress on the floor.
Rack Sentry can be bought and shipped by the Carton.
Rack Sentry® exceeds the European FEM standard of 400 N.m protection recommended for rack uprights.
For use in temperatures below 0°C, the use of Rack Sentry LT (Low Temperature) is recommended.
-
Sentry Protection Products
Rack Sentry with Cutouts
$ 38.16
Visit product page →Use Rack Sentry® rack protectors on your pallet rack uprights to protect them from from collisions with your forklifts.
Each Rack Sentry is made of a flexible EVA material that gives your racks a high visibility. Our rack guards are easy to install...you don't even need tools!
Rack Sentry is available in a number of sizes to fit most uprights (All Rack Sentry products are 18" tall and 3" deep.):
- 3" (75mm)
- 3.25" (80mm)
- 3.5" (90mm)
- 4" (100mm)
- 4.75" (120mm)
Rack Sentry® is ideal for intermediate rack uprights where high visibility and a flexible layer of protection is most needed. The product is designed to absorb impact by flexing and then returning to shape to work again. We have tested Rack Sentry® to a limit of 3mph (5km/h) using a 5,000 lb. (capacity) forklift without visible damage to the rack upright, forklift, or product.
Rack Sentry® installs directly to the rack upright, eliminating the need to drill into the floor at the rack upright. In use, Rack Sentry® puts no stress on the floor.
Rack Sentry can be bought and shipped by the Carton.
Rack Sentry® exceeds the European FEM standard of 400 N.m protection recommended for rack uprights.
For use in temperatures below 0°C, the use of Rack Sentry LT (Low Temperature) is recommended.
-
Sentry Protection Products
Special “Green” Recycled Column Sentry
$ 187.85
Visit product page →Recycled Column Sentry protectors are more environmentally friendly Column Sentry protection products. Made from post-industrial recycled polyethylene, this product can be made in all of the standard sizes as the original product. It also includes all of the features of the original model, including our proprietary air-cushion system, 24 pockets to protect your column, and its incredible ease of installation.
Because of its recycled content, it has to be molded in a dark color. We chose green, which should remind you of why you bought it.
The recycled column protectors are only available in North America at this time. It is a made-to-order item and not regularly stocked as are most of our products.
