Use Mighty Line Clear Polymer 6" X 10" Label Protectors to extend the life of your floor location labels.

Follow these steps to prolong the life of your floor location labels:

1. Apply bar code label on the floor in front of the proper bay location.
2. Apply Mighty Line Label Protector over the bar code label.
3. Repeat the procedure for all your floor location markers.

The Mighty Line Oxygen AED Floor Sign comes in two sizes, 24" X 36" and 36" X 42".

Mighty Line Floor Signs have a protective top that help to protect the sign from damage from vehicles, foot traffic, etc.The signs are peel and stick and are about .014 inches thick and they have a thin coating to protect against scuffs.

Park Sentry® Square is designed to fit around any sized 4-sided column, square or rectangular.  Park Sentry Square is a modular column padding product, made of a combination of corner pieces and flat panels that fit together for a seamless installation.  The components fit together with (included) interlocking keys and can be cut to fit smaller columns, or extra panels can be added to fit larger columns.  Integrated cutting grooves are spaced every 40mm (1.6") for easy sizing.

Park Sentry Square panels are thin, only 40mm (1.6") thick, adding little to the column's footprint.  The corner pieces add thickness where it is needed to absorb heavier blows - the corners are 55mm (2.2").  The The park column padding product is designed to double a typical auto bumper's ability to protect from collisions. 

Park Sentry Square is available in standard high visibility yellow or economical black or the components can be combined to create a high contrast installation.  The park column padding product is secured to the column using adjustable reflective straps.  For extra security Sentry's locking buckles can be added. 

Park Sentry Square

Installation

Custom fitting Park Sentry is very easy.

Simply measure the column and size the planks to fit the column.

The vertical ribs act as cutting guides and help to visually blend any transition between pieces.

For columns greater than 24" (61cm), extra planks can be used to add length. Each plank adds 17.25"(44cm) in length, or can be custom-cut to match your dimensions.

 

Install Park Sentry around column

 

Using the included key-locks, corners and planks are connected and placed around the column

Corners and planks fit together seamlessly

Recessed grommet holes within the belt recesses on each piece allow for optional mechanical installation - hidden by the reflective straps.

Strap down for a finished appearance

 

The reflective straps tighten easily and create a seamless appearance around the column.

The straps provide a contrasting color to make the column more visible

Any excess strap length can be cut and/or tucked back behind the strap for a neat appearance.

The Strap-Locking Buckle option for the Park Sentry parking protector gives the added security of a strap that can't come off. This buckle looks and functions just like a typical cinch-buckle, adjusting the length of the strap to fit the exact size of your parking protector installation. The Strap-Locking Buckle then snaps shut, making it difficult, if not impossible, to remove the strap without cutting through. This "vandal-resistant" technology is now available on black reflective Park Sentry straps.

The Park Sentry Wall System is a way to utilize the impact-absorbing properties of our Park Sentry Round panels against a variety of flat walls.  Park Sentry absorbs the impact of collisions without scratching painted finishes.  The wall system is attached above and below the "bumper zone," meaning no fasteners to scrape the vehicle.  Park Sentry is made of lightweight, energy-absorbing ARPRO®, the same material used in automobile bumpers.  Park Sentry Wall system is an easy-to-install barrier meant to reduce the cost of vehicle collisions while providing a highly visible, attractive appearance.

Park Sentry Wall System is created by using Park Sentry Round panels. These panels are 1 meter (39.3") tall, and are 702mm (27.65") wide per panel. Each wall clip is 1410mm (55.5") so it spans 2 panels. This means each carton of wall channel will install 12 panels (4 cartons) of Park Sentry Round panels and will cover 8.4 meters (about 27'6") of wall.

Installation

The Park Sentry Wall Clips are lightweight extruded polypropylene channels that are attached to the wall using standard fasteners (not included). The top rail of the channel includes a small groove intended to guide the fasteners and provide proper spacing.

Park Sentry Wall System uses this simple clip system to hold the Park Sentry Round panels firmly to a wall. The clips are continual and span the width of 2 panels. They are available in black only and ship 12 to a carton. The wall clips can be used to "box" the end of a run of panels, as in the photo here.

The Park Sentry Round panels connect to each other using an integrated tab and slot system, seen in this photo of the back (B) side. The Wall clips are attached top and bottom to hold firmly against a wall. These panels are available in yellow or black.

Use Rack Sentry® rack protectors on your pallet rack uprights to protect them from from collisions with your forklifts. 

Each Rack Sentry is  made of a flexible EVA material that gives your racks a high visibility. Our rack guards are easy to install...you don't even need tools!

Rack Sentry is available in a number of sizes to fit most uprights (All Rack Sentry products are 18" tall and 3" deep.):

• 3" (75mm)
• 3.25" (80mm)
• 3.5" (90mm)
• 4" (100mm)
• 4.75" (120mm)

Rack Sentry® is ideal for intermediate rack uprights where high visibility and a flexible layer of protection is most needed. The product is designed to absorb impact by flexing and then returning to shape to work again. We have tested Rack Sentry® to a limit of 3mph (5km/h) using a 5,000 lb. (capacity) forklift without visible damage to the rack upright, forklift, or product.

Rack Sentry® installs directly to the rack upright, eliminating the need to drill into the floor at the rack upright. In use, Rack Sentry® puts no stress on the floor.

Rack Sentry can be bought and shipped by the Carton.

Rack Sentry® exceeds the European FEM standard of 400 N.m protection recommended for rack uprights.

For use in temperatures below 0°C, the use of Rack Sentry LT (Low Temperature) is recommended.

Use Rack Sentry® rack protectors on your pallet rack uprights to protect them from from collisions with your forklifts. 

Each Rack Sentry is  made of a flexible EVA material that gives your racks a high visibility. Our rack guards are easy to install...you don't even need tools!

Rack Sentry is available in a number of sizes to fit most uprights (All Rack Sentry products are 18" tall and 3" deep.):

• 3" (75mm)
• 3.25" (80mm)
• 3.5" (90mm)
• 4" (100mm)
• 4.75" (120mm)

Rack Sentry® is ideal for intermediate rack uprights where high visibility and a flexible layer of protection is most needed. The product is designed to absorb impact by flexing and then returning to shape to work again. We have tested Rack Sentry® to a limit of 3mph (5km/h) using a 5,000 lb. (capacity) forklift without visible damage to the rack upright, forklift, or product.

Rack Sentry® installs directly to the rack upright, eliminating the need to drill into the floor at the rack upright. In use, Rack Sentry® puts no stress on the floor.

Rack Sentry can be bought and shipped by the Carton.

Rack Sentry® exceeds the European FEM standard of 400 N.m protection recommended for rack uprights.

For use in temperatures below 0°C, the use of Rack Sentry LT (Low Temperature) is recommended.